Price : $30.09
You Save : $9.90 (25%)
Item Description
Amazon.com Item Description
The Kidde PI2010 Battery-Operated Dual Sensor Smoke Alarm combines photoelectric and ionization sensing technologies into one particular unit to give broad detection against smoldering and flaming fires. Authorities advocate that for optimal protection you have each sorts of sensing engineering in your house. This smoke alarm's trademarked Hush function enables you to silence nuisance alarms, when an indicator LED and test feature let you conveniently confirm that the alarm is working.
The Kidde PI2010 Smoke Alarm:
- Employs each photoelectric and ionization sensors.
- Features a hush button to silence the alarm for non-emergency situations like a smoky dinner.
- Compact design blends in seamlessly with your residence decor.
- Wire-in smoke alarm with 9V battery backup.
With two various sensors, you'll get warnings sooner no matter the kind of fire. .
Be assured of your home's safety with the PI2010 smoke alarm. .Dual-Sensor Technologies for Enhanced SafetyExperts divide residence fires into two groups: flaming and smoldering. Flaming fires result from flammable liquids and cooking accidents, although smoldering fires most commonly occur when smoking supplies, such as cigarettes, are left unattended. Ionization smoke sensors may detect smaller, much less visible fire particles, like those produced by flaming fires, sooner than photoelectric sensors. However, photoelectric sensors are may perhaps detect larger, alot more visible fire particles, such as those developed by smoldering fires, sooner than ionization sensors. Every single need to pass identical performance standards to get third-party approval and meet Underwriters Laboratories (UL) 217, the independent normal to which alarms are listed. Due to the fact you don't know what type of fire you will have in your house, specialists recommend installing each types of technologies for optimal protection.
Professionals Suggest Protection from Each Sorts of FiresVirtually each and every recognized fire authority recommends the installation of both ionization and photoelectric alarms in order to maximize protection from either flaming or smoldering fires. Kidde gives photoelectric smoke alarms, ionization smoke alarms, and dual sensor alarms, which combine both technologies in one particular unit. Regardless of the technologies, the most critical point is to guarantee that you have operating smoke alarms on each and every floor of your home, inside each bedroom and outside sleeping locations. Studies show putting alarms in each bedrooms and hallways could enhance a family's escape time by up to 15 minutes.
Fire Authorities recommending both smoke alarm technologies:
Trademarked Hush Feature for ConvenienceBy pressing the Hush button, you can effortlessly and safely silence nuisance alarms caused by non-emergency scenarios, such as overcooked dinners.
This feature desensitizes the alarm for around seven minutes. For the duration of this time, the alarm chirps every 30 to 40 seconds. If the smoke is also dense, the Hush function is overridden and the alarm still sounds, and the alarm automatically resets at the finish of the seven minutes. This handy safety measure eliminates the temptation to get rid of the alarm's battery, which creates an unsafe situation.
Wire-in Smoke Alarm with Trustworthy 9-Volt Battery Backup, Indicator LED, and Test FeatureBecause a smoke alarm only assists protect you if it is operating, this unit attributes a red LED that flashes just about every 30 to 40 seconds to indicate that it is operating correctly. For additional peace of mind, the alarm consists of a test/reset button that enables you to periodically test its circuitry and horn.
The PI2010 is a wire-in smoke alarm with 9V battery backup, which supplies continuous protection against smoke and fire hazards even during power outages. The unit delivers a low battery warning that troubles a short chirp every 30 to 40 seconds for at least seven days prior to losing power, letting you know it's time to transform the battery.
The unit measures just 5.75 inches in diameter and 1.eight inches deep, and it characteristics a neutral, white finish. It capabilities tamper resist features to deter vandalism or theft.
This dual-sensor smoke alarm is UL listed, so you can be confident of its high quality, and it is backed by a ten-year restricted warranty.
About Kidde: A UTC Fire Security BrandRenowned for international leadership in fire detection and suppression, Kidde supplies options ranging from transportable fire extinguishers to advanced industrial controls such as flame detection and explosion suppression systems.
Kidde is a UTC Fire Safety brand, with a history that's wealthy with innovations, from the patent of the Chubb Detector Lock in 1818 to the improvement of the world's initial wireless networked smoke detectors in 2004.
What's in the BoxDual Sensor photoelectric/ionization smoke alarm with mounting bracket and mounting hardware, 9-volt battery, ten-year limited warranty, and bilingual user's manual.
The Kidde PI2010 is a breeze to operate and has a hush function to temporarily silence alarms.
From the Manufacturer
The Kidde PI2010 is a 120VAC, wire-in smoke alarm with 9V battery backup. This smoke alarm functions as a stand alone unit or in an interconnected technique. The Kidde PI2010 features hush, allowing you to fast silence nuisance alarms and also includes a tamper resist features that deters tampering and theft. The PI2010 includes a fast connect power harness that permits for fast and simple installation. This smoke alarm combines each photoelectric and ionization sensors. Ionization sensing alarms could possibly detect invisible fire particles (connected with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may perhaps detect visible particles (connected with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the a number of types of fire that can occur inside the property. The Kidde PI2010, 120VAC, wire-in smoke alarm with 9V battery backup delivers continuous protection against smoke and fire hazards, even for the duration of power outages. The combination of ionization and photoelectric sensors give the top protection against both rapid flaming and slow smoldering fires. The Kidde PI2010 interconnects with up to 24 Kidde devices of which 18 can be initiating. This unit also includes flashing LEDs to signal the alarm is functioning appropriately, a low battery warning and a loud 85dB alarm. The Kidde PI2010 is UL Listed and consists of a ten year restricted battery.
Client Reviews
I didn't know about replacing smoke alarms each decade till especially lately. The units in my house had been two decades old, hardwired AC with no battery backup. They tested fine but after twenty years it is absolutely time to replace them by any standard. There are 3 in my household, one on each and every floor.
Just after carrying out a bit of analysis and getting a intelligent consumer, I decided the PI2010 was the most effective selection out there. I bought them up at a nearby big box dwelling center for the reason that the price was very competitive with Amazon and I did not have to wait for shipping (even 100 % free super saver shipping).
In the box was a mounting bracket, 3-wire harness, directions, screws, and the smoke alarm.
Installation was a breeze - shut off the power at the circuit breaker initially, removed the old alarms and harnesses next. The directions with the PI2010 made it clear to not pull out the battery shipping tab till the units all had AC power applied. The mounting bracket was in a position to use the existing screws so I did not have to even get rid of them from the ceiling box. The harness wired up quickly and soon after plugging it into the alarm it only took a tiny twist to secure it to the mounting mounting bracket. After turning the power back on, I pulled the battery tabs out of every alarm. I tested every single 1, and had a buddy make positive the units on the other floors sounded also.
The alarms in this model are about twice as loud as my old smoke alarms, almost ear splitting loud so I think there is no chance to sleep via it. A green LED tells you it has AC power and there is a red LED that flashes every single so often to say it really is operating. I may very well find the 'hush' feature helpful for my occasional kitchen disaster, but fanning a cookie sheet is my usual move when I burn a thing too crispy.
The truth that the battery compartment is on the backside does not detract from the alarm. just a hassle-free quarter twist and the unit comes off the bracket. On that note, it does have an anti-tamper feature that if you pick out to activate, removing it from the bracket needs a read by way of the directions and a lot even more work.
All in all, it was a breeze to install, it looks and feels professional, it is the loudest alarm I've ever heard, and the hush feature is outstanding.
I plan on extending the wiring and installing these in every single of the bedrooms, above and beyond minimal code.
Just purchased a property and the smoke detector was over 20 years old. Right after hunting at the different smoke detectors on the web, realized that I necessary a dual alarm with each photoelectric and ionization sensors for preferred coverage. Most of the cheaper alarms are only ionization. This unit met my needs perfectly...
Dual sensor
Hard Wired (previous detector was challenging wired)
Battery Backup
Hush button (for false alarms)
Got the alarm a couple of days prior to the estimated arrival date. Pulled the pieces out of the box (instructions, bracket, unit, and wiring harness), did a fast look by way of the directions and went to perform. It really only took me about fifteen minutes to install...most of that time taking the old units bracket down and placing up the new 1. The wiring harness has three wires...black, white and red...but the red 1 has a plastic cover over the end in case you do not need to wire various alarms together.
Following attaching the needed wires to the house electric with wirenuts and electrical tape, just attach the bracket to the wall, make the confident the included battery is isntalled in the unit, plug the wiring harness into the back of the unit and attach to bracket. Piece o' cake.
If your dwelling currently has a specific wiring harness, and you do not want to mess with electrical, I think there are adaptors obtainable for the back of this unit as properly that can accept other shaped harnesses. Pretty handy, if you will need them. For me, it was fairly straight forward to cut the power and hook it up myself.
Related Product
No comments:
Post a Comment